Do you remember all those oldies but goodies? If you are also looking to convert your precious Vinyl LPs To CDs, Get Ready. Dust off your old 33′s, 45s & 78′s because Acoustica Spin It Again is out to make your Job easier.You can easily record any Vinyl LPs to CD or cassettes to CDs. You can record the whole LPs in a few very easy steps. Not only you can make the recording but also you can remove noise from your recording and bring them back to life. The whole process is so easier that If you have not done a recording in your whole life yet,you can use Spin It Again. Its wonderful step by step wizard makes things very much easier! You don’t need to use your own mind, Just read the live instructions on screen and go ahead.

We are very happy to review Acoustica Spin It Again. We have used this software to convert LPs to CDs and we are very happy to write Acoustica Spin It Again Review. This product is specially designed for recording LPs and Cassettes to CDs. It supports lots of features and a very neat step by step wizard to make the whole process easier. We will review every aspect of this LP To CD Converter in details.

Installation

The installation of the softwre was very easy. The size of installer file is 10 MB and after downloading it, you need to double click on it to begin the installation wizard. After following a very few basic steps, the installation is done without any hassle. Now you are ready to test drive the software and convert LPs To CDs. Here is a screenshot of Acoustica Spin It Again.

This is main aspect of this software. The user interface of the software is small and very neatly designed. Once you run the software, you would see a screen with three options on it.

1. Record a Vinyl LP
2. Record a Cassette Tape
3. Load a Sound File

You can click on whatever option you want to go with. We clicked on Record a Vinyl LP button. Once you click on the button, the software asks If you need help to hookup the things together. Unless you are fully aware of everything, you should click on “Yes” button. Once you click on “Yes” button, you’ll see a “Hook Up Wizard”. This wizard is specially focused on helping you so that you make the connections right. Making right connections is very important to get good quality recording so that you can convert LPs to CDs. Please follow this step by step wizard to make the connections. Here are a few very important things we would like to outline for our readers (These things are not a part of the software but you need to know them) :

A) You should always look for “Phono Out” jacks on your Record Player. Usually LPs produce a low volume and in certain cases It might not be enough for making good quality recordings, so you might need a preamp to boost the signal and then send that signal to your computer. Many Record Players have in-built preamps and in case yours doesn’t have it, you might need to use a Stereo Preamp.

Please note that using a preamp is not essential and you might not need it at all. It depends on several factors and you may always make the connections without using the Preamp in between to see the quality of recordings you get. If you think the quality is not up to the mark, you should use a preamp to boost the recording signal.

If you don’t have the cables or thepreamp and you wish to buy them, please look below for some very nice equipments and extremely low price. Feel free to read the customer reviews on the page (Once you click on the items, you can read the reviews) and decide yourself. These two hardware items are always need in recording from turntables.

B) The basic scenario of making connections is :

a) Connect Phono Out (Two RCA Jacks, one red and another white) on your Preamp to Line (One Steo Jack in of your computer. In mose cases, you’ll need a RCA To Stereo cable for connecting your Record Player and computer’s sound card. In case your LP has RCA jacks and your sound card also has RCA jacks, you’ll need a RCA to RCA cable. These cables are very cheap and easily available in nearby hardware stores.

b) If you are getting low volume recordings even after boosting the recording volume all the way up, you need to use a Preamp. In that case, first you’ll connect Record Player and Preamp with certain cables. Then you’ll connect your preamp and your computers sound card.

The basic thing is, you need to get a Line level input to make good recordings. If the level of recording is below Line level, the quality will not be up to mark. Please don’t get afraid that you won’t get the quality you are looking for. This is just a case and can be resolved with help of a preamp.

C) Please make sure that you don’t use Microphone jack instead of line in to make the recordings. The quality will not be satisfactory and you might get noise in the recording.

If you keep in mind the above points, there is no way you’ll get inferior quality recordings. This is the basic Setup. The software also includes a Hook UP Wizard to guide you through the process. Here is a screenshot from Hookup Wizard.

This software is a bomb when it comes to features. It supports lots of features and every feature is extremely useful for making the recording. First, It offers a step by step wizard with pictures to guide you throughout the process. The pictures make the things very clear and even a newbie can make the connectiosn easily.

Spin it Again also offers a “Level Wizard” which allows you to choose the recording source and set the recording volume. In most cases the software will choose the appropriate recording source by itself and you just need to set the recording volume. The software also allows you to monitor the sound while the recording is going on. This way you can know what is being recorded.

You would certainly find this Spin It Again Review very useful for you. Make sure you download the software from this page and give it a try. Now we’ll outline its other features.

1. It allows you to pause the recording after a certain period. You don’t need to sit on workstation to pause the recording once its done. You can simply select the duration when you want to pause the recording and the software will do it automatically for you.

2. It also shows you how much recording you can make on the hard disk. It shows free space on the hard disk and the maximum recording time.

3. You can select recording format including bit rates according to your requirement. You need to click on “Settings” button on Acoustica Spin In Again and here you can set the recording format to 8bit, 16bit or even 24bit recordings. Just for your information, there are very few software which supports 24bit recordings and Spin It Again is one of them. Here is a screenshot of the settings dialog.

7. After entering the song information, you need to click on “Next” button and this will show you a “Burn CD” dialog box. Here you can burn LPs to CDs. The LPs which you’ve just recorded is now ready to burn and you can choose from a variety of options. In case you don’t want to burn CD, you can save the files on your hard disk. Here is the LP To CD Burning Dialog Box. This software offers a wide variety of burning features.

8. After selecting Burn Audio CD button, you’ll see another dialog box to choose the CD burner. If you have multiple CD burners in your system, you can choose one accordingly and go ahead. The burning process is very smooth and works like charm. The Audio CD burned by Spin It Again is playable in your computer as well as other CD players.

That’s it. You have just converted your first LP to CD. Converting Vinyls, LPs, Cassettes to CDs is very easy. Just you need to understand the basic setup and make the right connections.

Help/Support

Acoustica of offering great support and really backing up their product with excellent support staff. In a very unlikely event, If you face any problem with the software you can always contact them and except a very swift reply.

Conclusion / Should I Buy The Software?

We hope you’ve read the Acoustica Spin It Again Review throughly and found it useful. Spin It again is certainly the best LP To CD Converter software out there. This software alone can do all the operations. There are some other companies which are selling the similar product and charging a lot by providing the features as “add ons”. This is not the case with Spin It Again. It comprises all the features required for converting LPs to CD.

If you are looking to convert your cassettes tapes or Viynls to CD, look no further. This software is very powerful and does everything. Its price is just $34.95 and we can certainly say this price is very low for the feature this software offers. You’ve got nothing to loose, give this wonderful LP To CD Converter a try and you won’t regret!